Our approvals:
BSI Kitemark
Benchmark standard for product quality
The product quality mark of approval that is recognised around the world.
All our extinguishers are Kitemarked, with the following exceptions:
- 1L Foam
- 1lL Water Mist
- 3KG Powder
- 3L Wet Chemical
- 2KG Polished Aluminium
- 6L/9L Stainless Steel Water
- 9L Stainless Steel Foam
PED/CE
Pressure Equipment Directive on all new extinguishers
The Pressure Equipment Directive or CE mark is a fundamental piece of European Legislation relating to the safety of pressure equipment throughout Europe. All of our extinguishers have the CE Mark.
Contact us for further information >>LPCB
Water Mist extinguishers
One of the challenges of keeping people safe is installing fire safety products that can be relied upon to do what they claim. Our commitment to ensuring your and your customers’ peace of mind includes enlisting the expertise of the Loss Prevention Certification Board to test our groundbreaking, multipurpose low pressure E-Series Water Mist extinguisher range.
Contact us for further information >>MED BSI
Marine Equipment Directive
The Maine Equipment Directive 96/98 EC is an approval for products than can be used specifically in the marine industry.
The following extinguishers have MED approval:
- 2KG CO2 New
- 5KG CO2 New
- 3L Water Mist
- 6L Water Mist
MED Apragaz
Marine Equipment Directive
The Maine Equipment Directive 96/98 EC is an approval for products than can be used specifically in the marine industry.
The following extinguishers have MED approval:
- 1KG ABC Powder
- 2KG ABC Powder
- 4KG ABC Powder
- 6KG ABC Powder
- 9KG ABC Powder
- 6L Foam
- 9L Foam
- 9L Water
- 6L Wet Chemical
CNPP
35KV Electrical Conductivity testing
This approval body operates internationally and we have used their expertise to conduct di-electric testing on some of our water and foam based extinguishers to ensure electrical conductivity safety.
The following extinguishers have passed the CNPP 35KV electrical conductivity test:
- 1L Water Mist
- 3L Water Mist
- 6L Water Mist
- 6L Water
- 3L Water Additive
- 6L Water Additive
- 2L Foam
- 3L Foam
- 6L Foam
- 6L Foam High Performance
- 9L Foam
Euro Environmental
Legionella testing for Water Mist extinguishers
We have independent, third party certification that our groundbreaking, multipurpose low pressure E Series water mist extinguisher range is free from legionella.
This testing was commissioned after some end users expressed concerns about the presence of legionella in the fine water mist spray produced by the E Series range.
Working in partnership with specialists in legionella testing, Euro Environmental Ltd, our 1L, 3L and 6L E Series water mist extinguishers were tested.
The tests were conducted after 6 months, 12 months and finally after the 5-year discharge period – on all three occasions, the results of the tests proved that the water in the extinguishers was free from legionella.
Contact us for further information >>Supplier Search
If you require a local or national distributor who can also commission, service and maintain our extinguishers please enter your company details and location below and we will contact you with some suggestions.